S.COAT No.2010 ,No.2012 SPRAY GUN
Perfectly designed for painting doors and side panels
- No. 2010 is angled with 15 degrees more than conventional type for easier painting from the front straight to downward. N0. 2012 has conventional angle setting for regular use.
- Air nipple is also angled to avoid being as obstacle for downward painting, as well as to be fixed steadily to the air hose.
Air hole is prepared in a dual structure type to improve atomization of the paint.
This helps paint atomization at lower pressure level and wider patterns to minimize color unevenness of metallic paints.
Designed to make proportionally workable both the paint adjustment knob (rotating type) and the actual ejection volume.
High workability and less color unevenness on surface finish by the matching of handling feeling and the actual ejecting volume, especially in half-powered operation such as blurring.
Designed to have less retention of paints remaining at connections of main body, paint nipple and nozzle.
Rounded corners in paint passage prevent retention of paint inside passage, and minimize problems such as spotty painted surface and so on.
Selected materials for high durability
SUS made body with brass screws and teflon packings have drastically improved durability much higher than conventional aluminum made spray gun.
Slightly heavier than aluminum made, however its well-balanced weight design give long time use capability.
|Use air Pressure