S.COAT 2015 Clear Coat
S.Coat 2015 Series
No.1 in workability and low cost in the industry
- Shiny, smooth surface, with a nice thickness. It has a good balance between gloss and thickness. Its durability has been proven in the market.
- Excellent drying, shine, and gradation properties can greatly shorten the time needed to apply it.
- Easily blended (mixed) with a clear coat. Easy to use for fine detailing.
- Economic (Operating costs can be reduced by 10~50% or more compared to clear coat products from other companies)
Clear Coat Type and Characteristics (Compared to other products)
| Product Name | Temperature |
Clear Hardener Ratio |
Mixing Ratio (Volume Ratio) |
Characteristics (Compared to other companies' products) |
|||||
|---|---|---|---|---|---|---|---|---|---|
| Finish | Drying | Shine | Cost | ||||||
| Clear Coat | Hardener | ||||||||
| S | Quick Dry medium solid |
41～59 | 4:1 | 100 | 25 | 3 | 5 | 5 | 5 |
| H | Standard medium solid |
60～77 | 4 | 4 | 5 | 5 | |||
| T | Slow Dry medium solid |
78～95 | 4 | 4 | 5 | 5 | |||
| GS | Quick Dry High performance |
41～59 | 2:1 | 100 | 50 | 4 | 4 | 4 | 4 |
| GH | Standard High performance |
60～77 | 5 | 4 | 4 | 4 | |||
| GT | Slow Dry High performance |
78～95 | 5 | 3 | 4 | 4 | |||
| Competitors Products A | 4:1 | 100 | 25 | 3 | 4 | 3 | 3 | ||
| Competitors Products B | 3:1 | 100 | 33 | 4 | 3 | 2 | 2 | ||
| Competitors Products C | 2:1 | 100 | 50 | 5 | 2 | 2 | 2 | ||
5: Excellent 4: Good 3: Average 2: Fair 1: Poor
Coating Method
As it doesn't drip easily, it is best to apply 2 to 3 coats of semi-wet ~ (set) ~ wet layers. (Setting time should be about 5 minutes for a small surface area and 0~3 minutes for a large surface area) For gradation, there are 2 stages of gradation with the use of a thinner (the 1st stage is 30% and the 2nd stage is 50%). Furthermore, you can also use gradation leveling agents and other companies' gradation agents (If you are using other companies' gradation agents, please test before applying to the vehicle). Please apply paint quickly after mixing the hardener (the glossy finish will appear neater). We recommend using any of the various thinners indicated by the S.Coat No. 2000 (other companies' thinners may also be used).
Standard Conditions for the Spray Gun
Please use an S.Coat No. 2012 Spray Gun.
Discharge rate (starting speed) is 2 to 3 times, discharge pressure (MPa) 0.15 ~ 0.25 (rotations), spray gun range is 10 ~ 25cm, with the nozzle fully open.
Discharge rate (starting speed) is 2 to 3 times, discharge pressure (MPa) 0.15 ~ 0.25 (rotations), spray gun range is 10 ~ 25cm, with the nozzle fully open.