3-coat pearl block paint
standard specifications
3-coat pearl block paint standard specifications
| Working Process |
Work | Air Pressure (Mpa) |
Amount of Discharge (Rotations) |
Gun Range (cm) |
|---|---|---|---|---|
| Discarding
Color Base |
 (2)The pattern is thinly and uniformly layered around 1/2. (3)If you encounter a problem like having dust, etc., please polish with #1000 or above paper (sandpaper) after drying. |
0.15~0.18 | 3.0~3.5 | 15~20 |
| (Final color) of the color base |
(1) The pattern is uniformly layered as to be hidden when gloss is applied around 2/3. (Re-coating is performed after it is dry to the touch.) | 0.15~0.20 | 3.0~3.5 | 15 |
| Setting |
(1)Room temperature drying (until dry to the touch) (2) Estimated to be at 20℃ for approximately 10 minutes |
|||
| Pearl Base |
 * At the time of applying color base paint, release the spray gun, paint several times while confirming the feel of the pearl. (Re-coating is performed after it is dry to the touch.) |
0.15~0.20 | 2~3 | 15~20 |
| Setting |
(1)Room temperature drying (until dry to the touch) * Estimated to be at 20°C for approximately 10 minutes |
|||
| Clear |
(1)Discard paint * Apply paint thinly and uniformly (2)Finish After confirming that the finish is dry to the touch, apply 2 coats, and finish the surface. (Please refer to the enclosed manual for the formulation ratio of clear and Hardener) |
0.2~0.22 | 3.5 | 10~15 |
| Drying |
(1)Specified drying conditions for each clear. (Please refer to the enclosed manual for the specified drying conditions of the clear) |
|||
| Polished finish | (1)For dirt, hard to clean spots and rough areas, polish using 1500~2000 paper, and condition the surface with compound. |